Selection Method of Mechanical Seals for Pumps
Release time:
2018-08-24
Source:
Author:
Mechanical seal is one of the precision and complex mechanical basic elements, and it is the key component of various pumps, reaction synthesis kettles, turbine compressors, submersible motors and other Grundfos equipment. Its sealing performance and service life depend on many factors, such as model selection, machine accuracy, correct installation and use, etc. How to select the model?
According to different working conditions and medium properties, mechanical seals include Grundfos pump mechanical seals that are resistant to high temperature and low temperature, high pressure and corrosion, granular media and light hydrocarbon media that are easy to vaporize. The main parameters of the selected Glandfos pump seals include: seal chamber pressure (MPa), fluid temperature (℃), working speed (m/s) Fluid characteristics and effective space for installing seals.
The basic principles of model selection are:
1. According to the pressure of the sealing chamber, it is determined that the sealing structure is balanced or unbalanced, single end or double end;
2. Rotary or static, hydrodynamic or non-contact type shall be adopted according to the working speed;
3. According to the temperature and fluid properties, determine the friction pairs and auxiliary sealing materials, and correctly select the lubrication, flushing, thermal insulation, cooling and other mechanical seal circulation protection systems;
4. According to the effective space of the installation seal, it is determined to use multiple springs or single springs or wave springs, internal or external.
Related information
What you must know about automatic gear
When parking, shift the gear to P, lock the rotating part with mechanical device, lock the output shaft through the parking brake device inside the transmission, and tighten the hand brake to prevent the car from moving. Only when the car is completely stopped can you switch to P gear. In addition, most automatic transmission models can only be ignited in P or N gear, which can prevent the car from suddenly starting due to the wrong gear.
2018-08-24

Mechanical seal device and application demand
Summary of mechanical seal device and application demand. The axial momentum of 04mm rotor is 0. The mechanical seal of 1mm device stops and the positioning end face of the seal housing is straight to the shaft. 04mm mechanical seal device is necessary Shaft sleeve seal cavity seal Liquid dynamic pressure bearing Common shaft housing shaft
2018-08-24

Selection Method of Mechanical Seals for Pumps
Mechanical seal is one of the precision and complex mechanical basic elements, and it is the key component of various pumps, reaction synthesis kettles, turbine compressors, submersible motors and other Grundfos equipment. Its sealing performance and service life depend on many factors, such as model selection, machine accuracy, correct installation and use, etc. How to select the model?
2018-08-24

Several types of mechanical seals
The failure forms of common bellows mechanical seal are mainly as follows, which are caused by bellows mechanical seal and its auxiliary system.
2018-08-24
